R&G “Tail Tidy” Fender Eliminator for BMW S1000XR ’15-’16
- Plug & play connectors make this plate holder easy to wire up using your oem signals or optional r&g incandescent micro indicators, r&g led micro indicators or the r&g aero led indicators for an even slicker look. This r&g tail tidy license plate holder is designed to replace the oversized factory fender with a more compact and cleaner looking tag holder. The tail tidy also includes an ultra bright led tail light that serves as a replacement for the oem unit, functioning as a running light and brake light. Lightweight powder coated aluminum provides a secure mounting point for your credentials while being lit with the included led marker light.
DUCATI 899,959,1199,1299 Tail Tidy FENDER ELIMINATOR KIT PANIGALE WITH TURN SIGNALS 2012,2013,2014,2015,2016,2017 OLSON PERFORMANCE Plug and Play
- Ducati panigale fender eliminator kit. 62. Our signature “arrow turn signals” blackout when not in use. Plug and play into factory wiring harness. 398. This fender eliminator kit was designed for the panigale enthusiast looking for a subtle but clean and safe alternative to the oversized (and ugly) factory fender. 340). Includes an injection molded cover for the tail section. (us patent no.
R&G “Tail Tidy” fender eliminator, Ducati Hypermotard 796 & 1100
- Easy installationwith step by step illustrated instruction. Powder coated black for durability and a high quality finish. Imported from europe. Cleans up the look of your motorcycle.
R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan S ’15-’18
- The r&g “tail tidy” license plate holder cleans up the look of your vulcan s by replacing the unsightly plastic rear fender and oem taillight with a much sleeker unit. A clear lens led taillight is compact and ultra bright while the powder coated black frame is just big enough to hang your credentials without detracting from the look of your rig. Reinstall your original turn signals or opt for more compact r&g incandescent micro indicators, r&g led micro indicators or the r&g aero led indicators for an even cleaner look. Simple plug & play connectors make for an easy installation with no wires to cut.
R&G “Tail Tidy” fender eliminator, MV Agusta F3
- Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the mv agusta f3 675(’12- onwards)and f3 800 (’13- onwards). Compatible with both oem and r&g micro indicators. Made from aluminium for weight saving and strength, powder coated black for durability. Transform the back end of your bike with an r&g tail tidy.
Evotech Performance Yamaha XSR900 Tail Tidy/Fender Eliminator. (2016 to 2018) Bun002444
- No modifications to the wiring are required, simply plug and play. All required fixings are supplied in the kit with easy to follow online instructions. Cnc machined from lightweight aircraft grade aluminium. Finished in a durable satin black powder coating to give a factory finish with long term durability. You retain the original yamaha factory signal lamps and we supply a new discreet led license plate light that is more in keeping with the unique design.
R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR500R ’13-’15, CB500F ’13-’15 & CB500X ’13-’17
- The installation of this tail tidy requires modification to the subframe, however the structural integrity of the subframe is not affected (see photo7 in gallery, which highlights the area that required modification). Compatible the oem or r&g micro indicators (rg370/rg371). Made from an abs plastic injection moulded tail unit and light surround with an aluminium plate (powder coated black for durability and a high quality finish) to support the number plate. Supplied with a “plug & play” connector for installing the e-marked licence plate light (included). Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the honda cbr500r, cb500f and cb500x (’13- onwards). Designed using the latest 3d scanning technology for an exact fit.
R&G “Tail Tidy” fender eliminator kit for BMW S1000RR ’10-’14 & S1000R ’14-’15
- Cleans up the look of your motorcycle. Easy installationwith step by step illustrated instruction. Imported from europe. Powder coated black for durability and a high quality finish.
R&G Tail Tidy Fender Eliminator for Kawasaki Z650 ’17
- Tighten up the rear end of your z650 with the tail tidy fender eliminator from r&g features directly replaces original tag holder/rear fender significantly improves aesthetics & provides a lower profile built in led license plate light accepts factory original or upgraded r&g indicators (kawasaki luggage may require upgrading to smaller r&g indicators) sturdy stainless steel construction black powder coated finish improves durability & corrosion resistance no permanent modifications required for proper fitment designed specifically for the kawasaki z650 simple & easy bolt-on installation. Sturdy stainless steel construction mounts to the motorcycle in the same manner as the oem unit and is powder coated black for improved durability and corrosion resistance. An led tag light is also included in the kit to ensure your license plate is still visible at night. This slick fender eliminator is compatible with the original turn signal indicators or upgrade to the r&g micro led or aero led signals for an even sharper appearance. The r&g tail tidy fender eliminator for kawasaki z650 ’17 replaces the unnecessarily large factory original tag holder with a much slimmer unit significantly enhancing overall aesthetics.
R&G “Tail Tidy” fender eliminator, Triumph Bonneville ’06-, Thruxton ’04- PRICE REVISION
- This model is suitable for the triumph bonneville, triumph thruxton models (’06- onwards) and triumph scrambler (’08- onwards) and can only be fitted with aftermarket micro/mini indicators with an 8mm thread (suggest r&g products rg370 for bulb type, or code rg371 for led type), please see related products for more details. Our tail tidy units are easy to fit and transform the rear of the bike. Supplied with an replacement red rear brakelight with built in plate illuminator (clear rear light also available separately #la0003, see products below). Made from stainless steel for strength and powder coated black for great looks and durability. Tidy up your rear end with an stainless steel r&g tail tidy/licence plate holder.
R&G Tail Tidy fender eliminator kit for Triumph Street Triple ’13-’14, Street Triple R ’13-’14 & Daytona 675 ’13-’14
- Compatible with either oem and r&g micro indicators. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the triumph street triple (2013) and triumph daytona 675 (’13-). Supplied with a “plug & play” connector for installing the e-marked licence plate light (included). Made from stainless steel and powder coated black for durability and a high quality finish.
R&G “Tail Tidy” fender eliminator, Yamaha WR250X ’09 -. WR250R ’12 -
- Cleans up the look of your motorcycle. Powder coated black for durability and a high quality finish. Easy installationwith step by step illustrated instruction. Imported from europe.
R&G Racing LP0133BK Tail Tidy Fender Eliminator
- 5 inch us license plate adapter. You can either drill their plate, or add the 1. Tidy up the rear of your bike with the fender eliminator ‘tail tidy’. does not fit us or canadian license plates.
R&G “Tail Tidy” fender eliminator, Kawasaki Versys 650 ’06-’09
- Cleans up the look of your motorcycle. Powder coated black for durability and a high quality finish. Easy installationwith step by step illustrated instruction. Imported from europe.
R&G “Tail Tidy” fender eliminator, Hyosung GT125R/GT250R/GT650 ’09-
- Cleans up the look of your motorcycle. Easy installationwith step by step illustrated instruction. Imported from europe. Powder coated black for durability and a high quality finish.
R&G “Tail Tidy” fender eliminator, Kawasaki 650 Versys 2010-2014
- Cleans up the look of your motorcycle. Easy installationwith step by step illustrated instruction. Fits 2010-2014 models. Powder coated black for durability and a high quality finish. Imported from europe.
R&G “Tail Tidy” Fender Eliminator For Triumph Speed Triple R ’16 & Speed Triple S ’16
- Sturdy stainless steel construction supports the license plate and factory turn signals and can also work with the upgraded micro led indicators or aero led indicators for an even sleeker appearance. Tidy up the tail of your motorcycle with this fender eliminator from r&g. This “tail tidy” is black powder coated for a durable and corrosion resistant finish that will continue to look great for years to come. Installation is simple, requiring no modifications, simply bolt-on and go. The r&g “tail tidy” fender eliminator removes the bulky factory tag holder and replaces it with a lower profile unit that installs under the rear seat providing a stylishly sporty look.
KEMIMOTO Z900 License Plate Holder Tail Tidy Fender Eliminator for Kawasaki Z900 2017 (Black)
- Easy install without installation instructions. For kawasaki z900 2017. Condition 100% brand new. Material high quality t6061 aluminum alloy. Need to manually connect the cables.
R&G “Tail Tidy” fender eliminator, Suzuki Hayabusa GSX1300R ’08
- Imported from europe. Easy installationwith step by step illustrated instruction. Cleans up the look of your motorcycle. Powder coated black for durability and a high quality finish.
R&G “Tail Tidy” Fender Eliminator for Harley Davidson Street 500 & 750 ’14-’16
- The tail tidy comes with easy to use connectors to reuse your factory turn signals or replace them with lower profile r&g micro indicators for and even sleeker look. The tag mount is powder coated stainless steel for strength and corrosion resistance, while the new tail light has a clear lens with ultra bright leds for running/brake/plate light functionality. The r&g tail tidy license plate holder is designed to replace the ugly oem set up for a lower profile, unit complete with led tail light that dramatically improves the aesthetics on the street 500 & 750.
R&G “Tail Tidy” fender eliminator, Suzuki DRZ400 SM & DRZ400
- This tail tidy is suitable for the suzuki drz400 super moto / drz400. Takes standard or mini indicators & includes tail/stop light with integral licence plate illumination (led) .
R&G “Tail Tidy” fender eliminator, Honda CBR1000RR 2012-2014 / CBR1000RR SP
- R&g is the first company in the world to launch a dedicated tail tidy for the honda cbr1000rr (’12 onwards). This product is fully compatible with either the oem indictators or our own r&g micro indictators (#rg370), available below.
R&G “Tail Tidy” Fender Eliminator for KTM 1290 Super Duke GT ’17
- The r&g “tail tidy” fender eliminator for ktm 1290 super duke gt ’17 replaces the bulky factory tag holder with a lower profile, more aesthetically pleasing unit. Rgr0001 or rg. Installation is simple, with no other modifications required, simply bolt-on and go. Tidy up the tail of your gt with this fender eliminator from r&g if your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the r&g resistors (rg. Rgr0002). This sleek tail tidy is powder coated black for a durable corrosion resistant finish that will continue to look great for miles. Sturdy stainless steel construction properly supports the license plate and factory turn signals and can also accommodate upgraded micro led indicators or aero led indicators for an even slicker appearance.
R&G Tail Tidy Fender Eliminator for Yamaha YZF-R25 / YZF-R3
- Made from aluminium for strength and weight saving, powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike removing the expansive oem licence plate holders replacing them with a much slicker looking unit, tucking the number plate up underneath the rear seat unit. Tidy up the rear end of the yamaha r25 and yamaha r3 with this powder coated aluminium r&g tail tidy/licence plate holder. This model is suitable for the yamaha r25 and yamaha r3 and can be fitted with either oem indicators or our own r&g aftermarket micro/mini indicators (rg370/rg371/rg372.
KEMIMOTO for Kawasaki Z125 / Z125 Pro License Plate Holder Tail Tidy Fender Eliminator (Style 1)
- Package include the same as the pictures show. For z125 / z125 pro 2015 2016 2017. Material high quality t6061 aluminum alloy (3mm thinkness). The color of led license plate light cover black.
R&G “Tail Tidy” fender eliminator, Honda NC700S/X / NC750S/X / Integra
- Tidy up your rear end with this r&g tail tidy/licence plate holder suitable for the honda nc700x/s/dct, the honda nc750x model and honda integra 700/750 models. Can be fitted with oem indicators, (as pictured) or our own aftermarket micro/mini indicators (rg370), please see related products for more details.
R&G “Tail Tidy” Fender Eliminator For Triumph Thruxton 1200 ’16 & 1200R ’16
- Enhance your motorcycles rear by installing the r&g “tail tidy” fender eliminator. Rgr0002). An led license plate illuminator is integrated into the design to provide a clean and modern look. Rgr0001 or rg. Replace your bulky factory tag holder with the much sleeker looking r&g “tail tidy” fender eliminator to improve your motorcycles appearance. If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the r&g resistors (rg. Constructed using sturdy stainless steel and powder coated black for a durable finish this motorcycle license plate holder will provide a more secure mounting solution over the factory hardware. This fender eliminator unit is compatible with the original turn signals or the r&g micro indicators or the aero led indicators for an even lower profile.
R&G “Tail Tidy” fender eliminator, Honda CBR125R ’11
- Easy installationwith step by step illustrated instruction. Powder coated black for durability and a high quality finish. Imported from europe. Cleans up the look of your motorcycle.
R&G Tail Tidy Fender Eliminator for KTM RC 390 ’15-’18
- The r&g tail tidy fender eliminator for your ktm rc 390 enhances the aesthetics of the rear end by replacing the enormous factory mud guard/license plate holder with a low-profile unit. Compatible with oem indicators or upgrade to r&g led indicators (sold separately) with the included adapters for an even sharper look. Upgrade the appearance of your rc 390 with a tail tidy from r&g. This attractive tail tidy re-positions the license plate and turn signal indicators directly below the tail light so they flow with the natural lines of the tail. Drilling, cutting or any other modifications are not required for proper installation. The tag is well lit at night utilizing an integrated led plate light that improves visibility. Stout stainless steel construction is powder coated black for improved durability and corrosion resistance.
R&G Tail Tidy Fender Eliminator for Yamaha FZ-09 ’17
- The r&g tail tidy fender eliminator will clean up the back end of your motorcycle. Replaces the large and cumbersome plate holder on the stock cantilevered mount. This handy unit is constructed out of stainless steel and is finished with a black powder coat for added protection and good looks.
R&G “Tail Tidy” fender eliminator, Suzuki Gladius ’09-
- Easy installationwith step by step illustrated instruction. Imported from europe. Powder coated black for durability and a high quality finish. Cleans up the look of your motorcycle.
Honda Grom MSX125 Tail Tidy Fender Eliminator (V1)
- Fender eliminator tail tidy with lights to fit on the honda grom and honda msx125.
R&G “Tail Tidy” fender eliminator for Honda CBR500R, CB500F ’13, CB500X ’13- (plastic moulded version)
- Compatible with either the oem indicators or our own micro indicators (rg370 / rg371). Tidy up your bike’s rear end with this injection moulded r&g tail tidy/licence plate holder for the honda cbr500r (’13- onwards), cb500x (’13- onwards) and cb500f (’13- onwards). Made from the latest injection moulding procedures and technologies for a superb finish and fit. Supplied with a “plug & play” connector for installing the e-marked licence plate light (included).
Tail Tidy Fender Eliminator with Led Light for Suzuki Hayabusa SM Pl 2008-2016
- య 100% guarantee if you receive a defective product, email us and we will replace it immediately. య You can add a license plate light and turn signals to the bracket. య Please check three aspects of information whether fits your car before buying the vehicle parts number appearance shape size model year compatibility table. య Its stylish design will perfect decorate your motorcycle, make it more attract attention. య Material use of high quality billet aluminum.
R&G Tail Tidy Fender Eliminator for Aprilia V4 Tuono 1100 ’15- , RSV4 RR ’15- , RSV4 RF
- Replace that unsightly rear fender on your aprilia with a sveltetail tidy from r&g features sturdy stainless steel construction lightweight aluminum main bracket attractive & durable powder coated black finish sleek low profile design provides a sharp aesthetic bolt-on installation does not require modifications replaces the ugly factory plastic fender / tag holder works with original indicators or upgrade to r&g micro led or aero led indicators bright led license plate tag light included quick connect electrical connectors. Strong stainless steel and aluminum construction is powder coated black for increased durability that blends well with the original undertail. This slick fender eliminator is 100% bolt-on and does not require any modifications to the bodywork for fitment. Use your stock turn signals or upgrade to micro led or aero led indicators for an even slimmer profile. The r&g tail tidy fender eliminator for select aprilia motorcycles replaces the huge factory tag holder/mud guard with a sleek low profile unit that significantly improves aesthetics.
R&G “Tail Tidy” fender eliminator, Kawasaki Versys 1000 ’12-’14
- Imported from europe. Easy installationwith step by step illustrated instruction. Cleans up the look of your motorcycle. Powder coated black for durability and a high quality finish.
R&G “Tail Tidy” Fender Eliminator for Ducati XDiavel & XDiavel S ’16
- Remove the ugly factory plate holder and show off more of that muscular 240 mm rear tire that looks so good. Most people will only see the back of your muscle bike so make sure it looks nice and “tidy” with this fender eliminator from r&g. Robust stainless steel construction is up to the task of supporting the license plate and a durable powder coated black finish will keep it looking good mile after mile. The r&g “tail tidy” fender eliminator for ducati xdiavel & xdiavel s’16 re-positions the tag holder to the left side of the rear tire for a cleaner more aggressive appearance.
R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR650F ’14-’15
- Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the honda cbr650f / cb650f ’14-. Supplied with e-marked licence plate light. Designed using the latest 3d scanning technology for an exact fit. Compatible the oem or r&g micro indicators -rg370 (bulb), rg371 (led)or rg372 (aero style). Made from aluminium (powder coated black for durability and a high quality finish) to support the number plate.
R&G “Tail Tidy” fender eliminator, MV Agusta Brutale 910 / 910R / 1090RR
- Compatible with both oem and r&g micro indicators. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the mv agusta brutale 910 (’05- onwards), mv agusta 910r and mv agusta 1090rr.
R&G “Tail Tidy” Fender Eliminator For Honda Grom MXS125 ’16-’17 For Use With Original Indicators
- R&g manufactures the ingeniously designed “tail tidy” using stainless steel and adds a black powder coat for a super durable finish. Lp0207bk. Made specifically for your motorcycle, includes all mounting hardware and installation instructions the r&g “tail tidy” fender eliminator provides you with a high-quality and sturdy substitution for the uninspiring original. The factory tag holder on the honda grom mxs125 is large, bulky and extends way over your rear tire, so replace it with the sleeker, sportier looking r&g “tail tidy” fender eliminator. This replacement license plate holder is compatible with your factory signals, comes with a led number plate light and cleans up the back end of your motorcycle. If you are interested in replacing the factory turn signals with the lower profile r&g micro indicators, please use the rg.
R&G “Tail Tidy” fender eliminator KTM 1290 Super Duke ’14
- Made from stainless steel for durability and laser cut for easy fitting. Finished in powder coated black, making it as hard as the bikes look. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the ktm 1290 super duke r ’14-. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the ktm 1290 super duke r ’14-. Original (oem) or mini / micro indicators can be fitted, see related products for r&g micro indicators.
R&G “Tail Tidy” fender eliminator, Triumph STREET Triple ’07- (to suit all exhausts)
- Oem indicators mount into undertray. This tail tidy / licence plate holder is suitable for the triumph street triple 675 ’07-’12 and the street triple r ’08-’12 and includes our replacement tail tidy light. Replacing the stock licence plate holder with a much smaller licence plate holder giving the bike back its sporty look mini indicators mount by attaching to number plate illumination light (la002) mount.
R&G “Tail Tidy” Fender Eliminator For USA BMW R nine T ’14-’15 In Single Seat Mode Only #LP0175BK
- For use when the pillion seat/speedhump and subframe are removed (single seat mode). Includes a rear license plate illuminator. Compatible only with the us specification (larger) rear brakelight. Made from a mix of aluminium and stainless steel. Requires additional purchase of aftermarket exhaust hanger.
R&G Tail Tidy Fender Eliminator For Ducati Scrambler 800 Icon ’15-’18
- The bracket is made from stainless steel and is powdercoated black. Note installation requires moving the license plate light wires from the swingarm to the rear tail section. The “tail tidy” from r&g lets you toss that thing in the trash and give your bike a much cleaner and more traditional look while still remaining legal. The tail section of the ducati scambler is already clean and simple right from the factory. The problem is the big, ugly license plate bracket that attaches to the swingarm. See installation instructions for further detail. Steel license plate bracket with led license plate light cleans up the rear of your scrambler.
R&G “Tail Tidy” fender eliminator, KTM 690 Enduro ’08- , 690SMC ’08-’11, 690SMCR ’12
- Note micro indicators not included, see alternative product. Tidy up your rear end with this r&g tail tidy/licence plate holder suitable for the ktm 690 enduro ’08, 690 smcr and 690smc ’08 models this tail tidy incorporates our replacement tail tidy light.
R&G “Tail Tidy” Fender Eliminator for Kawasaki ZX10R Ninja ’16
- Rgr0002). Most people are only going to see the back of the new zx10r so make sure you leave a good impression with r&g if your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the r&g resistors (rg. Get rid of the hideous factory tag holder and clean up the rear end of the zx10r ninja ’16 with the r&g “tail tidy” fender eliminator. Rgr0001 or rg. This svelte fender eliminator accentuates the motorcycles natural lines while keeping the factory indicators or upgrade to smaller and brighter r&g aero led indicators for an even sleeker look. Durable powder coated stainless steel construction ensures a secure foundation for mounting the license plate and turn signals while transforming the look tail.
R&G “Tail Tidy” fender eliminator, KTM 690 Duke ’12 / 690 Duke R ’13-
- Can be fitted with oem indicators, (as pictured) or our own aftermarket micro/mini indicators (rg370/rg371), please see related products for more details. The ktm 690 duke tail tidy is unique in that it retains the grab handles (unlike other tail units available for the ktm 690 duke). This model is suitable for the ktm 690 duke iiii (’12- onwards). Made from stainless steel for strength and powder coated black for great looks and durability. Supplied with an ‘e’ marked rear number plate illuminator for assured quality and reliability. It also features removable indicator mounting, for that rebellious look if you don’t run indicators. Tidy up your rear end with an stainless steel r&g tail tidy/licence plate holder. Our tail tidy units are easy to fit and transform the rear of the bike.
R&G “Tail Tidy” fender eliminator, Ducati 1199 Panigale
- Supplied with an ‘e’ marked rear number plate illuminator for assured quality and reliability. Can be fitted with oem indicators, (as pictured) or our own aftermarket micro/mini indicators (rg370), please see related products for more details. Tidy up your rear end with this aluminium r&g tail tidy/licence plate holder made from 3mm aluminium for strength and powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike. Suitable for the ducati 899 panigale ’13- and ducati 1199 panigale ’12- (all models).
R&G “Tail Tidy” fender eliminator, Ducati Multistrada 1200 (not with side cases)
- Cleans up the look of your motorcycle. Easy installationwith step by step illustrated instruction. Powder coated black for durability and a high quality finish. Imported from europe.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
