32 Best G Force Racings

 

G-Force 4101LRD G5 RACING GLOVES - Snell sa2010. G-flow ventilation system. Flame retardant liner. G-force 4101lrd g5 racing gloves. Reinforced mounting points for hans helmet restraint systems.

 

G-Force 3023XLGBK Pro Eliminator Black X-Large SA10 Full Face Racing Helmet - The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. No drilling or modification is required. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The thumb indention makes lifting the shield, even with gloves, simple and clean. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. An optically correct,. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs.

 

G-Force Racing Gear 0235BK10 GF235 RaceGrip Mid-Top Shoes Black Size 10 - 3×4. G-force racing gear 0235bk10 gf235 racegrip mid-top shoes black size 10. Product dimension (lxwxh) 13. 6. 6×11.

 

G-Force Racing Gear 0235BK8 GF235 RaceGrip Mid-Top Shoes Black Size 8 - Product dimension (lxwxh) 12. 2. 9×4. 2×9. G-force racing gear 0235bk8 gf235 racegrip mid-top shoes black size 8.

 

G-Force 3023XXLMB Pro Eliminator Matte Black XX-Large SA10 Full Face Racing Helmet - The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The thumb indention makes lifting the shield, even with gloves, simple and clean. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. No drilling or modification is required. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. An optically correct,. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs.

 

G-Force 3023XLGMB Pro Eliminator Matte Black X-Large SA10 Full Face Racing Helmet - A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. An optically correct,. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The thumb indention makes lifting the shield, even with gloves, simple and clean. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking.

 

G-Force 3028XLGBK Pro CFG Black X-Large SA10 Full Face Racing Helmet - An optically correct,. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The shell is capped with striking centerline graphic which will help separate you from the pack. G-force racing gear is proud to bring you the new cfg carbon fiber snell sa2010 helmet. The thumb indention makes lifting the shield, even with gloves, simple and clean. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The all new model is constructed of a carbon fiber shell, multi-density liner made with conehead technology and covered with a soft knit, flame retardant liner. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal.

 

G-Force 3027XLGWH Side Draft White X-Large SA10 Full Face Racing Helmet - The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The g-force racing gear modified helmet is the enclosed cockpit racers dream. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. Taken from the well received hybrid design, the modified helmet continues that tradition. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. No drilling or modification is required. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The modified helmet carries the snell sa2010 rating. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality.

 

G-Force 3023LRGBK Pro Eliminator Black Large SA10 Full Face Racing Helmet - The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The thumb indention makes lifting the shield, even with gloves, simple and clean. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. No drilling or modification is required. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. An optically correct,.

 

G-Force 4101LBL G5 RACING GLOVES - 25. 85×1. G-force racing gear 4101lbl g5 racing gloves large blue. Product dimension (lxwxh) 6. 2×14.

 

G-Force 4101XBK G5 RACING GLOVES - Premium nomex®/leather. G5 racegrip. Sfi-5. Double layer. Gloves, driving.

 

G-Force 0235090BK RaceGrip Black Size 090 Mid-Top Racing Shoes - The shoe is lined with fire-retardant cotton to keep your feet cool in hot racing conditions and extra comfort is provided by a racegrip innersole with arch support. Available in black, blue and red. The racegrip sole is manufactured from a high grip rubber compound and its low-profile beveled sole that keeps the shoe from catching on the pedals. The gf235 race shoe is g-force’s most popular and is built with top quality suede leather and an exclusive racegrip sole.

 

G-Force 3028LRGBK Pro CFG Black Large SA10 Full Face Racing Helmet - G-force racing gear is proud to bring you the new cfg carbon fiber snell sa2010 helmet. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The thumb indention makes lifting the shield, even with gloves, simple and clean. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The all new model is constructed of a carbon fiber shell, multi-density liner made with conehead technology and covered with a soft knit, flame retardant liner. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. An optically correct,. The shell is capped with striking centerline graphic which will help separate you from the pack.

 

G-Force 3023MEDMB Pro Eliminator Matte Black Medium SA10 Full Face Racing Helmet - An optically correct,. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. No drilling or modification is required. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The thumb indention makes lifting the shield, even with gloves, simple and clean.

 

G-Force 4105LRGBU Pro Series Blue Large Racing Gloves - Premium leather and nomex is used to build this 2 layer glove that is accented with a carbon fiber printed knuckle pad and contrasting stitching. 3/5 and comes with the official sfi issued tag to prove it. Available in black, blue and red. This attractive 2-tone glove meets the requirement of sfi 3. These gloves are produced to accent the new gf236 pro series shoes. The wrist gauntlet is secured with the velcro backed g-force label. The all new g-force pro series race glove was designed to meet all the demands of today’s amateur and professional drivers.

 

G-Force 4101MEDBK G5 Black Medium Junior Racing Gloves - G-force uses a special lightweight flame retardant fabric that wicks moisture away from the hands while giving the racer that exclusive racegrip feel. Sfi 3. 3/5 rating. Premium nomex knit and premium leather are used to make the g1 racegrip gloves.

 

G-Force Racing Gear 4386XRD GF505 Pants Only X-Large Red - 4. G-force racing gear 4386xrd gf505 pants only x-large red. 9×3. Product dimension (lxwxh) 15×11.

 

G-Force 0235030BK RaceGrip Black Size-030 Mid-Top Racing Shoes - Available in black, blue and red. The gf235 race shoe is g-force’s most popular and is built with top quality suede leather and an exclusive racegrip sole. The shoe is lined with fire-retardant cotton to keep your feet cool in hot racing conditions and extra comfort is provided by a racegrip innersole with arch support. The racegrip sole is manufactured from a high grip rubber compound and its low-profile beveled sole that keeps the shoe from catching on the pedals.

 

G-Force 3028MEDBK Pro CFG Black Medium SA10 Full Face Racing Helmet - Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. An optically correct,. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The all new model is constructed of a carbon fiber shell, multi-density liner made with conehead technology and covered with a soft knit, flame retardant liner. The thumb indention makes lifting the shield, even with gloves, simple and clean. G-force racing gear is proud to bring you the new cfg carbon fiber snell sa2010 helmet. The shell is capped with striking centerline graphic which will help separate you from the pack.

 

G-Force 4100XLGRD G1 Red X-Large Junior Racing Gloves - 3/5 rating. G-force uses a special lightweight flame retardant fabric that wicks moisture away from the hands while giving the racer that exclusive racegrip feel. It has a sfi 3. Premium nomex knit and premium leather are used to make the g1 racegrip gloves.

 

G-Force 4101LBK G5 RACING GLOVES - 15×14. 3. Product dimension (lxwxh) 6. G-force racing gear 4101lbk g5 racing gloves large black. 85×1.

 

G-Force 3023MEDWH Pro Eliminator White Medium SA10 Full Face Racing Helmet - This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. An optically correct,. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. No drilling or modification is required. The thumb indention makes lifting the shield, even with gloves, simple and clean. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out.

 

G-Force 3027XXLWH Side Draft White XX-Large SA10 Full Face Racing Helmet - The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. Taken from the well received hybrid design, the modified helmet continues that tradition. The modified helmet carries the snell sa2010 rating. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. No drilling or modification is required. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. The g-force racing gear modified helmet is the enclosed cockpit racers dream.

 

G-Force Racing Gear 4525XBK GF525 Suit X-Large Black - 5. G-force racing gear 4525xbk gf525 suit x-large black. 9×4. Product dimension (lxwxh) 17×13.

 

G-Force 0236110BK Pro Series Black Size 110 Racing Shoes - This shoe is made with carbon fiber printed leather insert for styling features. The radial grip sole also is loaded with multiple tread channels to move cooler air between your feet and the floor pan of your race vehicle. The back of this shoe has a deep cut-out where the shoe meets the back of the leg to allow for the rolling and rocking that comes with performance driving. The tread rolls up the back and has chamfered edging to prevent any catches in a heated pedal exchange. The laces on the pro series racing shoe are secured under a velcro enclosure to stop annoying slack from coming loose. The gf pro series racing shoe with radial-grip treaded sole is inspired from the world’s best high performance tires, the sole of this shoe will meet every demand of competitive driving. These shoes are produced to accent the new pro series race glove and are sfi 3. 3/5 rated. Available in black, blue and red.

 

G-Force 4101MBK G5 RACING GLOVES - 3x. G-force racing gear 4101mbk g5 racing gloves medium black. 4×3. Product dimension (lxwxh) 14. 4.

 

G-Force 3026LRGWH Modified White Large SA10 Full Face Racing Helmet - The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. No drilling or modification is required. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The modified helmet carries the snell sa2010 rating. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The g-force racing gear modified helmet is the enclosed cockpit racers dream. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. Taken from the well received hybrid design, the modified helmet continues that tradition.

 

G-Force 3025SMLMB Pro Vintage Matte Black Small SA10 Full Face Racing Helmet - The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. An optically correct,. This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet. The thumb indention makes lifting the shield, even with gloves, simple and clean. On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. No drilling or modification is required. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal.

 

G-Force 3027LRGWH Side Draft White Large SA10 Full Face Racing Helmet - No drilling or modification is required. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The modified helmet carries the snell sa2010 rating. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. Taken from the well received hybrid design, the modified helmet continues that tradition. The g-force racing gear modified helmet is the enclosed cockpit racers dream. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell.

 

G-Force Mens G7 Racing Glove (Black, X-Large) -   This sfi 3.  G-force racing gear uses crosshatch stitching for durability.   This allows for less weight and bulk on the hands that all users will appreciate. 3/5 rated, professional driver’s glove is made with a flame retardant base knit layer, silicone infused palm and a simple elastic wrist to snug the fit. With a mid-level price point the g7 is set to be the first choice for a high grip glove. Sold in black with gray colors and all come with the black and red silicone for grip. Sold in black and gray design with red accents. The all new g7 race glove was designed to offer the first silicone infused glove at a minimal price.

 

G-Force 3025MEDMB Pro Vintage Matte Black Medium SA10 Full Face Racing Helmet - This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. An optically correct,. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing. No drilling or modification is required. The thumb indention makes lifting the shield, even with gloves, simple and clean. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability.

 

G-Force 3023LRGWH Pro Eliminator White Large SA10 Full Face Racing Helmet - 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The thumb indention makes lifting the shield, even with gloves, simple and clean. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. No drilling or modification is required. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. An optically correct,. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.