(2009 – 2017) BMW S1000RR S1000R Carbon Fiber Rear Tire Hugger Fender Splashguard Mudguard
- Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun. 2 x 2 plain weave. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Flex resin for easier installation (epoxy resin binding).
BMW (2009-2014) S1000RR/ HP4 Carbon Fiber Fibre Heel Guard Plate Rearset (TYPE 2)
- Cured using autoclave and finished with a high-gloss clear coat. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1) left heel guard (1) right heel guard / [scroll down to see fitment chart]. Made of high quality (pre-preg) carbon fiber with fiber glass backing.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fairing
- 2×2 twill weave. Fits bmw s1000rr (15-17). Carbon fiber materials may require slight filing during installation. Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation. Made of the highest 3k carbon fiber materials.
2009 – 2011 BMW S1000RR Carbon Fiber Racing Tail Fairings
- Made of the highest 3k carbon fiber material, the racing tail fairing is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber racing tail fairing is specifically designed for bmw s1000rr (09-11).
BMW S1000R (2014-2017) / S1000RR (2015-2017) Carbon Fiber Fibre Under Tank Side Panels Fairings Bodywork
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1) left side under tank panel (1) right side under tank panel. Cured using autoclave and finished with a high-gloss clear coat. Scroll down to see fitment chart / made of high quality (pre-peg) carbon fiber with fiber glass backing.
(2015-2016) BMW S1000RR (100%) Carbon Fiber Fibre Lower Bodywork Belly Pan Fairing
- This listing is for (1 set) left & right lower belly pan fairings with pre-installed heat foil. Uv protective coating to prevent bleaching from the sun. [scroll down to see fitment chart] / made of 100% high quality, pre-preg carbon fiber. Cured using autoclave and finished with a high-gloss clear coat. Flex resin for easier installation (epoxy resin binding) / 2 x 2 plain weave.
Bestem CBBM-S1K-HGD-T Carbon Fiber Heel Guards for BMW S1000RR 2009 – 2014
- Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from 100 percentage high quality 3k carbon fiber. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today. Bestem bmw s1000rr carbon fiber chain guard in twill weave will give your motorcycle that special custom look. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. Fits bmw s1000rr.
(2015-2017) BMW S1000RR (100%) Carbon Fiber Fibre Side Panel Infill Cover Fairing Set
- Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Cured using autoclave and finished with a high-gloss clear coat. [Scroll down to see fitment chart] / made of 100% high quality, pre-preg carbon fiber. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1 set) left & right side panels, reuses the stock logo badges and turn signals.
Bestem CBBM-S1K-FFD-MT Carbon Fiber Front Fender for BMW S1000RR 2009 – 2015 S1000R 2014 – 2015 S1000XR
- Fits bmw s1000rr. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from 100 percentage high quality 3k carbon fiber with sulfate-free fiber glass backing. Bestem bmw s1000rr carbon fiber front fender in twill weave will give your motorcycle that special custom look.
BMW S1000RR S 1000 RR Carbon Fiber Fibre Frame Side Panel Cover Set
- Flex resin for easier installation 2 x 2 plain weave. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using autoclave and finished with a high-gloss clear coat. Use rtv silicon (450 degree heat rating) for a more permanent mount, (optional). This listing is for (1) left side cover (1) right side cover (accessories) 3m dual lock fasteners.
Bestem CBBM-S1K-EGCL-MTR Carbon Fiber Left Racing Engine Cover for BMW S1000RR HP4 2009 – 2014
- This part is made from 100 percentage high quality 3k carbon fiber. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today. Bestem bmw s1000rr carbon fiber engine cover left racing in twill weave will give your motorcycle that special custom look. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Fits bmw s1000rr.
BMW S1000R S1000RR (2015+) Carbon Fiber Fibre Rear Lower Under Tail Tray Fairing Panel Cover
- Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Made of high quality (pre-peg) carbon fiber with fiber glass backing. Cured using autoclave and finished with a high-gloss clear coat. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1) rear tail under seat tray / scroll down to see fitment chart.
(2009-2014) BMW S1000RR Carbon Fiber Race Integrated Tank Fuel Cover and Side Panel Fairing
- 2 x 2 plain weave. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Uv protective coating. Flex resin for easier installation [race approved 1-piece design (must drill your own holes)]. Manufactured using autoclave and finished with a high-gloss clear coat.
Bestem CBBM-S1K-CGD-AT Carbon Fiber Chain Guard for BMW S1000RR HP4
- Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from high quality 3k carbon fiber with sulfate-free fiber glass backing. Fits bmw s1000rr. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and it is test-installed. Uvc topcoat layer is used to protect the carbon fiber from fading, as is the problem with cheaper polyester or vinyl carbon fiber on the market today. Bestem bmw s1000rr carbon fiber chain guard in twill weave will give your motorcycle that special custom look.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover
- This carbon fiber front tank cover is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the front tank cover is uv-protected and prevented from yellowing.
(2010-2014) BMW S1000RR Carbon Fiber Fibre Headlight Front Fairing Cowl & Center Air Ram Dam
- Manufactured using autoclave and finished with a high-gloss clear coat. Direct replacement for your stock headlight fairing and center air ram. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Center air ram equipped with protective grill. Uv protective coating / 2 x 2 plain weave.
(2009-2011) BMW S1000RR Carbon Fiber Upper Rear Seat Top Tail Bodywork Fairing
- Cured using autoclave and finished with a high-gloss clear coat / uv protective coating to prevent bleaching from the sun. This listing is for (1) upper rear seat tail fairing, retains the use of the stock taillight and license holder. 2 x 2 plain weave. Flex resin for easier installation (epoxy resin binding). Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb).
2012 2013 2014 BMW S1000RR Carbon Fiber Twill Side Panel Infill Cover Fairing Set
- Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1 set) left & right side panels, reuses the stock logo badges and turn signals. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb).
Bestem CBBM-S1K-TKC-MT Carbon Fiber Front Tank Cover for BMW S1000RR 2009 – 2014
- Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from 100 percentage high quality 3k carbon fiber. Fits bmw s1000rr. Bestem bmw s1000rr carbon fiber front tank cover in twill weave will give your motorcycle that special custom look.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings
- Includes aluminum insert. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber mid side fairings are specifically designed for bmw s1000rr (15-17). Made of the highest 3k twill carbon fiber material, the mid side fairings are uv-protected and prevented from yellowing.
(2015-2017) BMW S1000R/S1000RR (100%) Carbon Fiber (2 Piece) Upper Rear Tail Seat Cowl Cover Fairing
- Uv protective coating to prevent bleaching from the sun. [Scroll down to see fitment chart] / made of 100% high quality (pre-preg) carbon fiber. Cured using autoclave and finished with a high-gloss clear coat. This listing is for (1) upper rear tail seat cover fairing (reuses the stock rubber pad). Flex resin (epoxy resin binding) for easier installation / 2 x 2 plain weave.
09 10 11 12 13 14 15 16 17 BMW S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset
- Brand new carbon fiber heel guards (this is for a complete set, left & right heel guard). Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using vacuum bagging and finished with a high-gloss clear coat.
Bestem CBBM-S1K-HGCG-T Black Carbon Fiber Rear Hugger with Twill Weave Chain Guard for BMW S1000RR 2009 – 2015 S1000R 2014 – 2015
- This part is made from high quality 3k carbon fiber with sulfate-free fiber glass backing. Bestem’s own special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Bestem bmw s1000rr carbon fiber real hugger with chain guard in twill weave will give your motorcycle that special custom look. Bestem has been in the motorcycling industry for over 6 years and has grown to be one of the largest carbon fiber manufactures and distributors in the usa. To ensure the best possible fit onto your motorcycle, this part was created from a casting of the original oem part and bestem has test-installed all of these final products before they are ready for market. Bestem also uses a uvc topcoat layer to protect the carbon fiber from fading, as it is a problem with cheaper polyester or vinyl carbon fiber on the market today. Fits bmw s1000rr. Most of us ride motorcycles, so bestem understands the viewpoint and needs of customers.
2009 – 2011 BMW S1000RR Carbon Fiber Tail Fairing
- Made of the highest 3k 100% carbon fiber material, the tail fairing is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber tail fairing is specifically designed for bmw s1000rr (09-11).
(2009 – 2017) BMW S1000R / S1000RR Carbon Fiber Fibre Rear Sprocket Chain Guard Cover Fairing
- Cured using autoclave and finished with a high-gloss clear coat / uv protective coating to prevent bleaching from the sun. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). This listing is for (1) rear chainguard cover fairing. Flex resin for easier installation (epoxy resin binding). 2 x 2 plain weave.
BMW S1000R S1000RR (2015-2017) Carbon Fiber Fibre Front Fuel Gas Petrol Tank Fairing Panel Cover
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1) front fuel tank cover panel. Scroll down to see fitment chart / exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Cured using autoclave and finished with a high-gloss clear coat.
(2015+) BMW S1000RR (100%) Carbon Fiber Fibre Upper Side Infill Panel Cover Fairings
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1 set) left & right upper side infill panel cover fairings. [Scroll down to see fitment chart] / made of 100% high quality (pre-preg) carbon fiber.
(2010-2014) BMW S1000RR Carbon Fiber Fibre Headlight Front Fairing Cowl & Center Air Ram Dam
- Uv protective coating 2 x 2 plain weave. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Direct replacement for your stock headlight fairing and center air ram. Manufactured using autoclave and finished with a high-gloss clear coat. Center air ram equipped with protective grill.
2009 2010 2011 BMW S1000RR Carbon Fiber Rear Seat Under Tray Tail Fairing Panel
- Cured using autoclave and finished with a high-gloss clear coat. Made of high quality (pre-peg) carbon fiber with fiber glass backing. Works with the stock (original) upper tail section or the ssr upper tail section this listing is for (1) under seat tray. Uv protective coating to prevent bleaching from the sun. Flex resin for easier installation (epoxy resin binding) 2 x 2 plain weave (this is the typical size and weave pattern used on oem).
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels
- This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Includes aluminum insert. Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing.
(2009-2017) Bmw S1000rr Carbon Fiber Fibre Heel Guard Plate Rearset
- Brand new carbon fiber heel guards (this is for a complete set, left & right heel guard). Manufactured using vacuum bagging and finished with a high-gloss clear coat. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding.
(2009-2011) BMW S1000RR Carbon Fiber Fibre Side Panel Infill Cover Fairing Set
- Fitment s1000rr (2009-2011) / will fit the following but changes the look of the motorcycle s1000rr (2012-2014) / hp4 (all years). Made of high quality (pre-preg) carbon fiber with fiber glass reinforced backing. Cured using autoclave and finished with a high-gloss clear coat /, uv protective coating to prevent bleaching from the sun. Flex resin for easier installation (epoxy resin binding) / 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1 set) left & right side panels, reuses the stock logo badges & turn signals.
2009 2010 2011 2012 2013 2014 2015 2016 Bmw S1000rr Carbon Fiber Better Than Fender Eliminator
- Manufactured using vacuum bagging and finished with a high-gloss clear coat. Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding. Brand new carbon fiber license plate holder.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Tail Side Fairings
- This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Includes aluminum insert. Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing.
(2015+) BMW S1000RR (100%) Carbon Fiber Fibre Left & Right Headlight Cowl Bodywork Fairing
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Made of 100% high quality (pre-preg) carbon fiber. This listing is for (1) left & right headlight cowl fairing / [scroll down to see fitment chart]. Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding).
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Lower Side Fairings
- Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation. 2×2 twill weave. Fits bmw s1000rr (15-17). Made of the highest 3k carbon fiber materials. Carbon fiber materials may require slight filing during installation.
2009 – 2011 BMW S1000RR Carbon Fiber Under Tail Fairing
- This carbon fiber under tail fairing is specifically designed for bmw s1000rr (09-11). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the under tail fairing is uv-protected and prevented from yellowing.
2015 2016 2017 BMW S1000RR Carbon Fiber Fibre Twill Upper Side Infill Panel Cover Fairings
- Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). This listing is for (1 set) left & right upper side infill panel cover fairings. Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding). 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts).
Bestem CBBM-S1K-HGR-ATM 100% Autoclave Twill Weave Carbon Fiber Hugger for BMW S1000RR HP4
- Bestem bmw s1000rr carbon fiber hugger in twill weave will give your motorcycle that special custom look. Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. Fits bmw s1000rr. This part is made from 100 percentage high quality 3k carbon fiber.
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Tail Panel
- Made of the highest 3k twill carbon fiber material, the rear tail panel is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber rear tail panel is specifically designed for bmw s1000rr (15-17).
Bestem CBBM-S1K-TSP-MT Carbon Fiber Tank Side Panels for BMW S1000RR 2009 – 2014
- Special formulated epoxy resin provides excellent flexibility and durability and will not change shape or crack under road use. This part is made from 100 percentage high quality 3k carbon fiber with sulfate-free fiber glass backing. Fits bmw s1000rr. Bestem bmw s1000rr carbon fiber tank side panels in twill weave will give your motorcycle that special custom look.
(2009-2016) BMW S1000RR S1000R (100%) Carbon Fiber Fibre Rear Passenger Pillion Replacement Seat Cover Top
- Uv protective coating to prevent bleaching from the sun. Made of 100% high quality (pre-peg) carbon fiber. 2 x 2 plain weave / reuses the stock locking system. Flex resin for easier installation (epoxy resin binding) / this listing is for (1) rear seat tail replacement cover. Cured using autoclave and finished with a high-gloss clear coat.
(2015-2017) BMW S1000RR Carbon Fiber Fibre Center Headlight Air Ram Intake Inlet Fairing
- 2 x 2 plain weave (this is the typical size and weave pattern used on oem). [Scroll down to see fitment chart] / cured using autoclave and finished with a high-gloss clear coat. This listing is for (1) center headlight air ram intake inlet bodywork fairing. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Made of high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb).
2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Under Tail Fairing
- Includes aluminum insert. Made of the highest 3k twill carbon fiber material, the under tail fairing is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber under tail fairing is specifically designed for bmw s1000rr (15-17).
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
