R&G “Tail Tidy” fender eliminator, Honda CB1000R ’08-
- Replacing the stock licence plate holder with a much smaller licence plate holder giving the bike back its sporty look tidy up your rear end with this r&g tail tidy/licence plate holder suitable for the honda cb1000r’08- models. Note micro indicators not included, see alternative product.
2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender Eliminator Tail Tidy 4 T/S Black
- Direct fitting this kit comes with everything shown in picture fender eliminator and a license plate light (to keep you legal). “Lifetime warranty”. 120 thick stainless steel so it won’t break like all these other high dollar one’s. I have great customer service and strive to make each customer/fellow biker a repeat buyer. Everything shipped in the us takes roughly 1-4 business days. You will need to get washers so these front turn signals will mount to your bike. Made from. Internationally we ship to almost every country and timing can vary from 1 to 5 weeks depending on your countries customs which we have no control over. Shipping unlike other sellers i ship everything with a low value and as a gift so you don’t have to pay a lot of taxes if your country charges them. If you have any issue please give me a chance to fix it before posting negative feedback. Fits years 2013, 2014, 2015 and 2016. Please note you should always use loctite when re installing any after market parts. Also the 4 turn signals shown in the picture come with this kit too. Everything is shipped via usps. And that’s why i have a lifetime warranty on all my stuff including the lights. The plate light is in the middle of the bracket in the picture.
Motorcycle Chrome Fender Eliminator Tidy Tail For 1999-2012 Suzuki Hayabusa Gsxr1300 R NEW
- Quantity 1. Direct bolt-on replacement no modification is needed. Instructions not included,condition brand new, never used,material billet aluminum,,. Motorcycle high quality lightweight fender eliminator / tidy tail new. You can add a license plate light and turn signals to the bracket.
NRC Tail Tidy Fender Eliminator Integrated Flush LED Kit for Ducati Panigale 1199 899 S R Tricolore Corse
- Eliminates oem fender to give it that clean, race like look. Integrated ultra-bright led signal lights for a sleek finish. Made in usa. Powder coated black for durability and a high quality finish. Plug and play signal light wiring for a no splice clean install.
HTT Black LED light Fender Eliminator Tidy Tail “Hayabusa” Logo For 1999-2012 Suzuki Hayabusa Gsxr1300 R
- Direct bolt-on replacement no modification is needed. Instructions not included,condition brand new, never used,material billet aluminum,,. There have the led license plate light , and you can add the turn signals to the bracket. Quantity 1. High quality lightweight fender eliminator / tidy tail.
R&G Tail Tidy Fender Eliminator for Yamaha YZF-R25 / YZF-R3
- This model is suitable for the yamaha r25 and yamaha r3 and can be fitted with either oem indicators or our own r&g aftermarket micro/mini indicators (rg370/rg371/rg372. Our tail tidy units are easy to fit and transform the rear of the bike removing the expansive oem licence plate holders replacing them with a much slicker looking unit, tucking the number plate up underneath the rear seat unit. Made from aluminium for strength and weight saving, powder coated black for great looks and durability. Tidy up the rear end of the yamaha r25 and yamaha r3 with this powder coated aluminium r&g tail tidy/licence plate holder.
LUO Motorcycle Racing Fender Eliminator License Plate Bracket Holder Tail Tidy Black Fit for Suzuki GSXR 600 / GSX-R600 2006-2010
- We strive to answer all emails as quickly as possible, but due to high email volume and different time zones,it may take times for us to reply(and we can not reply emails in time on weekends and other public holidays, please wait with patience if you send us emails on/before these days). Fitment 2006-2010 suzuki gsxr 600 / gsx-r600 2006-2010 suzuki gsxr 750 / gsx-r750 note all communications are handled through email. Customers satisfaction is very important to us thanks in advance for your patience. We really appreciate your positive amazon feedback .
Black LED light Fender Eliminator Tidy Tail For 96-12 Suzuki Gsxr 600 750 01-12 Gsxr 1000
- There have the led license plate light , and you can add the turn signals to the bracket. Quantity 1. High quality lightweight fender eliminator / tidy tail. Direct bolt-on replacement no modification is needed. Instructions not included,condition brand new, never used,material billet aluminum,,.
2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender eliminator Tail Tidy BLACK 2T/S
- If you have any issue please give me a chance to fix it before posting negative feedback. This kit comes with everything shown in picture fender eliminator and a license plate light (to keep you legal). Shipping, unlike other sellers i ship everything with a low value and as a gift so you don’t have to pay a lot of taxes if your country charges them. “Lifetime warranty”. Also the 2 turn signals shown in the picture come with this kit too. The plate light is in the middle of the bracket in the picture. Please note you should always use loctite when re-installing any after market parts. And that’s why i have a lifetime warranty on all my stuff including the lights. Internationally we ship to almost every country and timing can vary from 1 to 5 weeks depending on your countries customs which we have no control over. Direct fitting. If you want the kit that has 4 turn signals so the front match that one is on my other listing. 120 thick stainless steel so it won’t break like all these other high dollar one’s. Everything shipped in the us takes roughly 1-4 business days. Fits 2013, 2014, 2015 and 2016. Made from. I have great customer service and strive to make each customer/fellow biker a repeat buyer. Everything is shipped via usps.
R&G “Tail Tidy” fender eliminator, KTM 990SM ’08- / 990SMR ’08- / 990SMT / 950SM(R) ’05-
- Our tail tidy units are easy to fit and transform the rear of the bike. Tidy up your rear end with a stainless steel r&g tail tidy/licence plate holder. Made from stainless steel for strength and powder coated black for great looks and durability. This model is suitable for the ktm 950 supermoto, 950 supermoto r, 990 supermoto and 990 supermoto r (’08-’12) and ktm 990 smr models (’12- onwards) and can be fitted with oem indicators, (as pictured) or our own aftermarket micro/mini indicators (rg370/rg371), please see related products for more details. Supplied with an replacement rear brakelight with built in licence plate illuminator.
Yamaha R1 Fender Eliminator Tail Tidy NTS Black Logo 2004 – 2014
- These fit the 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 & 2014 yamaha r1 bikes. Installationif you do not have your existing hardware (which is what you use) you will have to go to a local bike shop to get it. The installation is so simple that it does not require/include any instructions. Yes it has been designed to fit all these years. These are not those cheap plastic painted (tonka toy plastic from china) or the thin metal that you see elsewhere that look like mine. Check out my other pages for many other custom parts too go with these. These are designed for integrated turn signals and have no spot for your turn signals. It looks the same but it has a spot for turn signals. If you want one with turn signals check out my other items. This is a yamaha r1 fender eliminator custom made precision laser cut with your bikes logo cut into them. “No one else does” this is the perfect way to dress up your r1 for the show. 12 thick aluminum (the powder coated and bare one’s) or. I make everything i sell so i offer a lifetime warranty for as long as you own your bike. 12 thick stainless steel (polished to a mirror/chrome like finish) so they will never rust or flake off like chrome would in time. All my heel guards, chain guards and fender eliminators are machined from. Sorry i do not carry any nor do i know the size. I have all colors and even a carbon fiber look (hydro dipped to look like carbon fiber). I know they are different but i designed mine to fit accordingly. It replaces your oem part. I have sold a ton of these with no problems. You can do a custom fit on older bike just by drilling a couple of holes to mount it too. They are design by me with a unique cut-out design. They will bolt right up in the existing spot as your stock ones.
Krator NEW Fender Eliminator Kit Holder Tidy Tail Bracket For 2009 Suzuki GSXR 600 / GSX-R600
- Attributeshigh quality lightweight fender eliminator / tidy tail with gsxr logo cut outyou can add a license plate light and turn signals to the bracketdirect bolt-on replacement. No modification is neededprofessional installation is recommendedspecificsquantity 1logo gsxrinstructions not includedcondition 100% brand newmaterial billet aluminumcolor blackfitment 2009 suzuki gsxr 600 / gsx-r600.
KnightMotor Black License Plate Frames for Yamaha YZF R6 2006-2012
- Fit for 2006-2012 yamaha yzf r6. Color black quantity 1 material billet aluminum. Please make sure these will fit for your bike before purchasing, thank you. License plate frame can prevent the license plate drop off when driving and it need to be securely mounted in the vehicle body. High quality lightweight fender eliminator / tidy tail you can add a license plate light and turn signals to the bracket direct bolt-on replacement no modification is needed professional installation is recommended.
Krator NEW Fender Eliminator Kit Holder Tidy Tail Bracket For 2011 Yamaha YZF R6
- No modification is neededprofessional installation is recommendedspecificsquantity 1instructions not includedcondition 100% brand newmaterial billet aluminumcolor blackfitment 2011 yamaha yzf r6. Attributeshigh quality lightweight fender eliminator / tidy tailyou can add a license plate light and turn signals to the bracketdirect bolt-on replacement.
Motorcycle Chrome LED light Fender Eliminator Tidy Tail Fit For 2006-2012 Yamaha Yzf R6 Yzf-R6 Yzfr6
- Quantity 1. Instructions not included,condition brand new, never used,material billet aluminum,,. Direct bolt-on replacement no modification is needed. There have the led license plate light , and you can add the turn signals to the bracket. Motorcycle high quality lightweight fender eliminator / tidy tail.
R&G “Tail Tidy” fender eliminator, Ducati Hypermotard 820
- Made from stainless steel and powder coated black for durability and a high quality finish. Tidy up your bike’s rear end with this stainless steel r&g tail tidy/licence plate holder for the ducati hypermotard 820 (’13- onwards). Compatible with either the oem indicators or our own micro indicators (rg370 / rg371). Supplied with a “plug & play” connector for installing the e-marked licence plate light (included).
2004-2014 Yamaha R1 Fender Eliminator Tail Tidy Black Kit with 2 Turn Signals & Plate Light
- 12 thick stainless steel (polished to a mirror/chrome like finish) so they will never rust or flake off like chrome would in time. I have all colors and even a carbon fiber look (hydro dipped to look like carbon fiber). I sale them this way and cheaper so you guys can paint or powder coat them whatever color you want too. Yes it’s designed to fit all these years. It replaces your oem part. This kit comes with the turn signals and plate light that you see in the pictures. All my heel guards, chain guards and fender eliminators are machined from. Sorry i do not carry any nor do i know the size. The installation is so simple that it does not require/include any instructions. This is custom made precision laser cut with your bikes logo cut into them. “No one else does” this will bolt right up in the existing spot as your stock ones. I know they are different but i designed mine to fit accordingly. They are designed by me with a unique cut-out design. Check out my other pages for many other custom parts to go with these. Installation if you do not have your existing hardware (which is what you use) you will have to go to a local bike shop to get it. I make everything i sell so i offer a lifetime warranty for as long as you own your bike. I have sold a ton of these with no problems. These are not those cheap plastic painted (tonka toy plastic from china) or the thin metal that you see elsewhere that look like mine. Please note that all of my bare items (unpainted) will need something done to them. You can do a custom fit on older bike just by drilling a couple of holes to mount it too. 12 thick aluminum (the powder coated and bare one’s) or. Also all lights are hardwired in. Fits 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 & 2014 yamaha r1. They have only been de burred and formed.
2004-2014 Yamaha R1 Fender Eliminator Tail Tidy tsm BLUE logo
- I sale them this way and cheaper so you guys can paint or powder coat them whatever color you want too. The installation is so simple that it does not require/include any instructions. I have all colors and even a carbon fiber look (hydro dipped to look like carbon fiber). Yes it’s designed to fit all these years. They are designed by me with a unique cut-out design. Please note that all of my bare items (unpainted) will need something done to them. I make everything i sell so i offer a lifetime warranty for as long as you own your bike. I know they are different but i designed mine to fit accordingly. You can do a custom fit on older bike just by drilling a couple of holes to mount it too. I have sold a ton of these with no problems. This one comes with no lights. 12 thick stainless steel (polished to a mirror/chrome like finish) so they will never rust or flake off like chrome would in time. It replaces your oem part. They have only been de burred and formed. 12 thick aluminum (the powder coated and bare one’s) or. These are not those cheap plastic painted (tonka toy plastic from china) or the thin metal that you see elsewhere that look like mine. All my heel guards, chain guards and fender eliminators are machined from. This is custom made precision laser cut with your bikes logo cut into them. If you want lights they are on my other pages or you can buy the whole kit on my other pages as well. Installation if you do not have your existing hardware (which is what you use) you will have to go to a local bike shop to get it. “No one else does” this is the perfect way to dress up your r1 for the show. Sorry i do not carry any nor do i know the size. Fits 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 & 2014 yamaha r1. Check out my other pages for many other custom parts to go with these. They will bolt right up in the existing spot as your stock ones.
HTT Chrome LED light Fender Eliminator Tidy Tail “Hayabusa” Logo For 1999-2012 Suzuki Hayabusa Gsxr1300 R
- Instructions not included,condition brand new, never used,material billet aluminum,,. Direct bolt-on replacement no modification is needed. There have the led license plate light , and you can add the turn signals to the bracket. Quantity 1. High quality lightweight fender eliminator / tidy tail.
Motorcycle Black Fender Eliminator Tidy Tail For 1999-2012 Suzuki Hayabusa Gsxr1300 R NEW
- Direct bolt-on replacement no modification is needed. Motorcycle high quality lightweight fender eliminator / tidy tail new. You can add a license plate light and turn signals to the bracket. Quantity 1. Instructions not included,condition brand new, never used,material billet aluminum,,.
R&G “Tail Tidy” Licence Plate Holder for MV Agusta 675 / 800 Brutale
- Supplied with a “plug & play” connector for installing the e-marked licence plate light (included). Compatible with either oem and r&g micro indicators. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the mv agusta brutale 675 (’12- onwards) and mv brutale 800 (’12-). Made from aluminium and powder coated black for durability and a high quality finish.
HTT Chrome LED light Fender Eliminator Tidy Tail “GSXR” Logo For 1996-2012 Suzuki GSXR600 GSX-R750/ 2001-2012 Suzuki GSXR 1000
- There have the led license plate light , and you can add the turn signals to the bracket. Direct bolt-on replacement no modification is needed. Instructions not included,condition brand new, never used,material billet aluminum,,. Quantity 1. High quality lightweight fender eliminator / tidy tail.
R&G “Tail Tidy” fender eliminator, Suzuki DRZ400 SM & DRZ400
- This tail tidy is suitable for the suzuki drz400 super moto / drz400. Takes standard or mini indicators & includes tail/stop light with integral licence plate illumination (led) .
Universal Aluminium Tail Tidy Fender eliminator motorcycle number bracket
- The listing for one of universal aluminium tail tidy fender eliminator motorcycle number bracket. High quality lightweight fender eliminator. Aluminum tail tidy for motorcycle fender eliminator number bracket license plate holder universal tail tidy. Aluminum color black allow the use of license plate lights and oem or aftermarket turn signals easy to adjust the height of turn signals.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
