Top 15 Best Paughcos

 

Paughco Straight Fishtail Exhaust Extension Bracket #ad

Paughco Straight Fishtail Exhaust Extension Bracket

Paughco Straight Fishtail Exhaust Extension Bracket #ad - You must order one clamp per pipe being replaced. This is a single required mounting bracket to install 31″ inch paughco straight fishtail exhaust extensions p/n 605 on 1995-1999 harley davidson flht models.

 

XKMT- Black Round 2 Rise 1 25mm Mount Handlebar Risers Compatible With DNA Paughco Chopper Bobber #ad

XKMT- Black Round 2″ Rise 1″ /25mm Mount Handlebar Risers Compatible With DNA Paughco Chopper Bobber

XKMT- Black Round 2″ Rise 1″ /25mm Mount Handlebar Risers Compatible With DNA Paughco Chopper Bobber #ad -   round smooth riser caps no visible hardware compatible with a super custom look complete kit includes risers, caps and mounting hardware  hand polished and coated mount hole tapped ½” x 13 compatible with use with h-d stock riser bolts this auction includeds 1/2″-13 x 1/2″-20 adapter studs to use on dna, paughco,and aftermarket springer front ends bolts may need to be cut to length made of t-6061 billet aluminum sold in pairs. 2″ rise, 1″ mount handlebar risers compatible with harley specifics these are 2″ rise and are compatible with handlebars with 1″ diameter clamping area.

 

Paughco Tail Pipe Extension Slash Cut 607S #ad

Paughco Tail Pipe Extension Slash Cut 607S

Paughco Tail Pipe Extension Slash Cut 607S #ad - 1-7/8″ diameter, designed to fit over 1-3/4″ diameter pipes. No slider bracket. Sold each.

 

Paughco Custom Wide Springer Front Forks 186B1 AXLE KIT 34 OEM Brake #ad

Paughco Custom Wide Springer Front Forks 186B1 AXLE KIT 3/4″ OEM Brake

Paughco Custom Wide Springer Front Forks 186B1 AXLE KIT 3/4″ OEM Brake #ad - Distance between rear legs is 85/16″ outside width is 91/2″. Wide springer without shock features mounting points for dual disc brakes no front fender mounting points. Classic springer looks with quality second to none from the premier springer manufacturer. Forks come assembled and include fork neck, top nut, crown nut, riser-style top clamp and inner springs. Wide springer with shock has a front fender mount similar to the 88-92 fxsts.

 

Paughco Staggered Goose-Cut Drag Pipes for Shovelhead 723A #ad

Paughco Staggered Goose-Cut Drag Pipes for Shovelhead 723A

Paughco Staggered Goose-Cut Drag Pipes for Shovelhead 723A #ad - • an outside-the-frame front pipe• rear pipe that routes in front of the transmission• guarantee classic style and a throaty sound• 34″ goose-cut drag pipes• 1-3/4″.

 

Paughco 1-34&Prime Upsweep Fishtail Drag Pipes 716B2F #ad

Paughco 1-3/4&Prime, Upsweep Fishtail Drag Pipes 716B2F

Paughco 1-3/4&Prime, Upsweep Fishtail Drag Pipes 716B2F #ad - Great looking old school tanks modified to feature very low 1 1/4in deep tunnels and flat bottoms. Made from high-quality 18-gauge akdq special deep draw material. Take all 22mm h-d or aftermarket petcocks and screw-in gas caps. Paughco upsweep fishtail drag pipes. Centerline hole-to-hole on mounting brackets 16 5/8in.

 

Paughco Frame Rail Clamp 523-2 #ad

Paughco Frame Rail Clamp 523-2

Paughco Frame Rail Clamp 523-2 #ad - Can be used with p-clamps or custom applications. Diameter. Made in usa. For frames with a 1-1/8 in. Supports pipe sets in areas where brackets wont work or mount to frame.

 

Paughco Rigid Wishbone Frames Without Fatbob Tank Mounts S128 #ad

Paughco Rigid Wishbone Frames Without Fatbob Tank Mounts S128

Paughco Rigid Wishbone Frames Without Fatbob Tank Mounts S128 #ad - Has a 30deg neck rake, 0in backbone stretch, and 0in downtube stretch. Standard-width rear section accepts 130-series tire, and includes a paughco chromed steel transmission mounting plate. Made with 1 1/8in down tubes (125 wall thickness) and 1 1/2in backbone (188 wall thickness). Compatible with twin cam a and evolution motors, 86-99 softail 5/6-speed transmissions and 1 1/2 drive belt. Oem-style neck.

 

Paughco Axed Gas Tank with Screw-In Cap - 42 Gal 822CS #ad

Paughco Axed Gas Tank with Screw-In Cap – 4.2 Gal. 822CS

Paughco Axed Gas Tank with Screw-In Cap – 4.2 Gal. 822CS #ad - They have the late stock-style screw-in filler and vent. 42-gallon single cap tanks will bolt right to the stock frame. Includes a paughco threaded hose line fitting for the vent bung on the bottom of the tank. Accepts 22mm aftermarket or stock h-d petcocks and they come with a bare metal finish and have been pressure tested.

 

Paughco Upsweep Fishtail Drag Pipes for Rigid Frames 719B2F #ad

Paughco Upsweep Fishtail Drag Pipes for Rigid Frames 719B2F

Paughco Upsweep Fishtail Drag Pipes for Rigid Frames 719B2F #ad - These pipes never go out of style. Include brackets and hardware where applicable. Classic upswept fishtails go with any chopper.

 

Ricky Bongos USA 2 Springer Stretch Rockers with Speed Holes for Repop Paughco DNA Moto Iron Springer Front Ends - Chrome - 34 Axle - MADE IN USA #ad

Ricky Bongos USA 2″ Springer Stretch Rockers with Speed Holes for Repop, Paughco, DNA & Moto Iron Springer Front Ends – Chrome – 3/4″ Axle – MADE IN USA

Ricky Bongos USA 2″ Springer Stretch Rockers with Speed Holes for Repop, Paughco, DNA & Moto Iron Springer Front Ends – Chrome – 3/4″ Axle – MADE IN USA #ad - Made from laser cut 3/8 plate, tig-welded and designed to allow you to use your stock springer hardware. Bushings are made from 932 alloy cast bronze with 750″ id. Rocker stretchers extend your front wheel out 2″ from stock. Made in the usa. 2125″ center-to-center rocker holes.

 

Paughco Shock for FXSTS FXSTSB FLSTS FLSTSC and FLSTSB 175 #ad

Paughco Shock for FXSTS, FXSTSB, FLSTS, FLSTSC and FLSTSB 175

Paughco Shock for FXSTS, FXSTSB, FLSTS, FLSTSC and FLSTSB 175 #ad - • the perfect solution for the handling problems associated with stock springer shocks• chrome finish• comes with 2 mounting bolts and chrome acorn nuts.

 

Paughco XL WIDE Mustang Style Gas Tank for Custom Builds Early Cam Style Bayonet Gas Cap Mount - EXTRA LARGE 475 Gallon - 1316 Petcock Bung - Harley Motorcycle Chopper Bobber Fuel #ad

Paughco XL WIDE Mustang Style Gas Tank for Custom Builds Early Cam Style Bayonet Gas Cap Mount – EXTRA LARGE 4.75 Gallon – 13/16″ Petcock Bung – Harley Motorcycle Chopper Bobber Fuel

Paughco XL WIDE Mustang Style Gas Tank for Custom Builds Early Cam Style Bayonet Gas Cap Mount – EXTRA LARGE 4.75 Gallon – 13/16″ Petcock Bung – Harley Motorcycle Chopper Bobber Fuel #ad - Also available in smaller sizes. The perfect mustang style tank with an extra large capacity of 475 gallons fabricated from 18 gauge hrpo steel with heavy duty 11 gauge saddle style mounting tabs. Front and rear saddle style mounts on 19-3/4″ centers with a 2″ id to accommodate many custom builds/frames. The underside of the tank is indented for added rocker box clearance. Early cam/bayonet style gas cap mount (gas cap not included) 13/16″ external thread npt bung for petcock underneath on left hand side of tank 475 gallon capacity.

 

Paughco 726B2 Upsweep Fishtail Drag Pipes Headpipes Only #ad

Paughco 726B2 Upsweep Fishtail Drag Pipes (Headpipes Only)

Paughco 726B2 Upsweep Fishtail Drag Pipes (Headpipes Only) #ad - Will not work with fxe type battery. Kick start only. 70-84 fl, fx cone shovelhead with rigid frame. Designed for extensions or mufflers. Kick start only.

 

Paughco Rocker Cover for Harley Davidson 1948-65 Panhead engines #ad

Paughco Rocker Cover for Harley Davidson 1948-65 Panhead engines

Paughco Rocker Cover for Harley Davidson 1948-65 Panhead engines #ad - Drawn and formed and polished to a bright finish available in a smooth or ribbed design. Sold in pairs. Made in the usa. H-d#17500-48.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.