48 Best and Coolest Honda Cr125ms

 

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Clutch Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Clutch Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Clutch Lever by Niche Cycle Supply - Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Note coat the threading with anti-seize before installation to prevent fusing. Check fitment below. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench.

 

HONDA CR125M 74-75 Yellow Lightning Skull Pile Seat Cover

HONDA CR125M 74-75 Yellow Lightning Skull Pile Seat Cover

HONDA CR125M 74-75 Yellow Lightning Skull Pile Seat Cover - Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1978 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Quantity 1 set (left & right).

 

Honda CR125M 74-75 Gradeint Flame Dirtbike Black Seat Cover

Honda CR125M 74-75 Gradeint Flame Dirtbike Black Seat Cover

Honda CR125M 74-75 Gradeint Flame Dirtbike Black Seat Cover - Cnc titanium gray handlebar grips for 1978 honda cr125m. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber.

 

Titanium Gray Aluminum Cnc Motorcycle 78 22Mm Handlebar Gel Rubber Hand Grips For 1975 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1975 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1975 Honda Cr125M - Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1975 honda cr125m. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle.

 

Honda CR125M 77-78 Black Brake Lever by Niche Cycle Supply

Honda CR125M 77-78 Black Brake Lever by Niche Cycle Supply

Honda CR125M 77-78 Black Brake Lever by Niche Cycle Supply - Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Check fitment below. Note coat the threading with anti-seize before installation to prevent fusing. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits.

 

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Brake Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Brake Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Polished Black PVC Tip Brake Lever by Niche Cycle Supply - Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Note coat the threading with anti-seize before installation to prevent fusing. Check fitment below.

 

Honda CR125M 74-75 US Flag Dirtbike Seat Cover

Honda CR125M 74-75 US Flag Dirtbike Seat Cover

Honda CR125M 74-75 US Flag Dirtbike Seat Cover - Material cnc machined aluminum + none-slip gel rubber. Quantity 1 set (left & right). Brand new high quality 7/8″ handlebar grips. Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1978 honda cr125m.

 

Honda CR125M 74-75 Cyborg Dirtbike Black Seat Cover

Honda CR125M 74-75 Cyborg Dirtbike Black Seat Cover

Honda CR125M 74-75 Cyborg Dirtbike Black Seat Cover - Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1978 honda cr125m. Brand new high quality 7/8″ handlebar grips. Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber.

 

Honda CR125M 77-78 Black Clutch Lever by Niche Cycle Supply

Honda CR125M 77-78 Black Clutch Lever by Niche Cycle Supply

Honda CR125M 77-78 Black Clutch Lever by Niche Cycle Supply - Check fitment below. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Note coat the threading with anti-seize before installation to prevent fusing.

 

Honda CR125M 74-75 Ghost Flame YL Dirtbike Seat Cover

Honda CR125M 74-75 Ghost Flame YL Dirtbike Seat Cover

Honda CR125M 74-75 Ghost Flame YL Dirtbike Seat Cover - Cnc titanium gray handlebar grips for 1978 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber. Brand new high quality 7/8″ handlebar grips.

 

Black Motorcycle 78 CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1975 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1975 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1975 Honda CR125M - Come with throttle tube sleeves. 100% brand new. Double open end design for stock bar end plug or aftermarket bar end mirrors. Black 7/8″ motorcycle rubber gel with throttle tube for 1975 honda cr125m. Grips length 12cm (4-3/4″).

 

Black Motorcycle 78 CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1974 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1974 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1974 Honda CR125M - 100% brand new. Black 7/8″ motorcycle rubber gel with throttle tube for 1974 honda cr125m. Double open end design for stock bar end plug or aftermarket bar end mirrors. Come with throttle tube sleeves. Grips length 12cm (4-3/4″).

 

Black Motorcycle 78 CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1976 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1976 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1976 Honda CR125M - Double open end design for stock bar end plug or aftermarket bar end mirrors. Black 7/8″ motorcycle rubber gel with throttle tube for 1976 honda cr125m. Grips length 12cm (4-3/4″). Come with throttle tube sleeves. 100% brand new.

 

MOTORCYCLE ALUMINUM CNC 78 22mm HANDLE BAR RUBBER GEL HAND GRIPS FOR HONDA CR125M WITH RED BAR END

MOTORCYCLE ALUMINUM CNC 7/8″ 22mm HANDLE BAR RUBBER GEL HAND GRIPS FOR HONDA CR125M WITH RED BAR END

MOTORCYCLE ALUMINUM CNC 7/8″ 22mm HANDLE BAR RUBBER GEL HAND GRIPS FOR HONDA CR125M WITH RED BAR END - Condition brand new. To fit honda, yamaha, suzuki, kawasaki, ducati and bmw triumph sportbikes with 7/8″ standard bars and use dual cable throttle control. Inner hole diameter left, 7/8″(22mm)right, 1″(25mm) for twist gas throttle. Material cnc machined aluminum and none-slip gel rubber.

 

Stainless Steel Allen Bolt Set - Honda CR125M Elsinore - 1974-1975 - 28 Bolts

Stainless Steel Allen Bolt Set – Honda CR125M Elsinore – 1974-1975 – 28 Bolts

Stainless Steel Allen Bolt Set – Honda CR125M Elsinore – 1974-1975 – 28 Bolts - Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Note coat the threading with anti-seize before installation to prevent fusing. Check fitment below.

 

HONDA CR125M 74-75 Reaper Seat Cover

HONDA CR125M 74-75 Reaper Seat Cover

HONDA CR125M 74-75 Reaper Seat Cover - Have a nice day. Any questions email us. We will reply within 24 hours. This seat cover is made of quality marine grade waterproof vinyl sewn with 92 weight upholstery thread. This is mildew resistant, and abrasion resistant i guarantee that each will fit. No pick-up allowed. Thanks. Return we accept return within 15 days from delivery date. This means that the shipping fee will be the displayed amount for all ship-to destinations shown. This is a new hand crafted seat cover. Shipping options we will be shipping this via usps priority service. So if you want to return it please email us as soon as you can. Tell me the reason and send me picture also. These are custom made and can take up to 12 days to ship. We ship worldwide this item is subject to a fixed shipping price. All items are shipped with tracking number (usa).

 

AHL Front Fork Shock Oil Seal and Dust Seal Set 35mm x 48mm x 11mm for Honda CR125M 1976-1978  CR250 M 1973-1976

AHL Front Fork Shock Oil Seal and Dust Seal Set 35mm x 48mm x 11mm for Honda CR125M 1976-1978 / CR250 M 1973-1976

AHL Front Fork Shock Oil Seal and Dust Seal Set 35mm x 48mm x 11mm for Honda CR125M 1976-1978 / CR250 M 1973-1976 - Each kit comes with 1pair fork oil seal(35x48x11mm) and 1pair dust seal(35x48mm). Quality assuranceif you are not satisfied with our products,we accept all of the return,replacement or refund requests. Effectively prevent oil spills and defense against dirt and other contaminants. 100% brand neweasy to install,high quality with competitive price. High quality rubber material made to oem specifications for superior durability.

 

Honda CR125M Elsinore 74-76 Black GP Clutch Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Black GP Clutch Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Black GP Clutch Lever by Niche Cycle Supply - Check fitment below. Note coat the threading with anti-seize before installation to prevent fusing. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench.

 

Honda CR125M Elsinore 74-76 Black GP Brake Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Black GP Brake Lever by Niche Cycle Supply

Honda CR125M Elsinore 74-76 Black GP Brake Lever by Niche Cycle Supply - Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Note coat the threading with anti-seize before installation to prevent fusing. Check fitment below. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench.

 

Honda CR125M 74-75 Pink Skull Pile Dirtbike Seat Cover

Honda CR125M 74-75 Pink Skull Pile Dirtbike Seat Cover

Honda CR125M 74-75 Pink Skull Pile Dirtbike Seat Cover - Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1978 honda cr125m.

 

HONDA CR125M 74-75 Standard Seat Cover

HONDA CR125M 74-75 Standard Seat Cover

HONDA CR125M 74-75 Standard Seat Cover - Have a nice day. We ship worldwide this item is subject to a fixed shipping price. No pick-up allowed. Return we accept return within 15 days from delivery date. This means that the shipping fee will be the displayed amount for all ship-to destinations shown. Any questions email us. This seat cover is made of quality marine grade waterproof vinyl sewn with 92 weight upholstery thread. This is a new hand crafted seat cover. This is mildew resistant, and abrasion resistant i guarantee that each will fit. All items are shipped with tracking number (usa). These are custom made and can take up to 12 days to ship. Shipping options we will be shipping this via usps priority service. Tell me the reason and send me picture also. Thanks. We will reply within 24 hours. So if you want to return it please email us as soon as you can.

 

Titanium Gray Aluminum Cnc Motorcycle 78 22Mm Handlebar Gel Rubber Hand Grips For 1977 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1977 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1977 Honda Cr125M - Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1977 honda cr125m. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle.

 

Honda CR125M 74-75 Skull Pile Dirtbike Seat Cover

Honda CR125M 74-75 Skull Pile Dirtbike Seat Cover

Honda CR125M 74-75 Skull Pile Dirtbike Seat Cover - Cnc titanium gray handlebar grips for 1978 honda cr125m. Material cnc machined aluminum + none-slip gel rubber. Quantity 1 set (left & right). Brand new high quality 7/8″ handlebar grips. Left side is 7/8″, right side is 1″ for gas throttle.

 

Titanium Gray Aluminum Cnc Motorcycle 78 22Mm Handlebar Gel Rubber Hand Grips For 1978 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1978 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1978 Honda Cr125M - Brand new high quality 7/8″ handlebar grips. Cnc titanium gray handlebar grips for 1978 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Material cnc machined aluminum + none-slip gel rubber. Quantity 1 set (left & right).

 

Honda CR125M 74-75 Carbon Fiber Dirtbike Seat Cover

Honda CR125M 74-75 Carbon Fiber Dirtbike Seat Cover

Honda CR125M 74-75 Carbon Fiber Dirtbike Seat Cover - Cnc titanium gray handlebar grips for 1978 honda cr125m. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Material cnc machined aluminum + none-slip gel rubber. Brand new high quality 7/8″ handlebar grips.

 

Motion Pro Clutch Cable - Honda CR125M CM250C XLXR 250350500

Motion Pro Clutch Cable – Honda CR125M CM250C XL/XR 250/350/500

Motion Pro Clutch Cable – Honda CR125M CM250C XL/XR 250/350/500 - Check fitment below. Manufactured to exact measurements to meet or exceed oem specification. Equivalent to honda oem part numbers 22870-435-610,  22870-428-000, 22870-kb4-000, 22870-356-000, 22870-400-000 motion pro part number 02-0041. Motion pro clutch cable for some of the xl and xr 250’s, 350’s, 500’s + the cr125m and cm250c. Length 48 3/4″.

 

Titanium Gray Aluminum Cnc Motorcycle 78 22Mm Handlebar Gel Rubber Hand Grips For 1976 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1976 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1976 Honda Cr125M - Brand new high quality 7/8″ handlebar grips. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1976 honda cr125m. Material cnc machined aluminum + none-slip gel rubber.

 

Honda CR125M 77-78 Black GP Brake Lever by Niche Cycle Supply

Honda CR125M 77-78 Black GP Brake Lever by Niche Cycle Supply

Honda CR125M 77-78 Black GP Brake Lever by Niche Cycle Supply - Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Check fitment below. Note coat the threading with anti-seize before installation to prevent fusing.

 

Honda CR125M 77-78 Black GP Clutch Lever by Niche Cycle Supply

Honda CR125M 77-78 Black GP Clutch Lever by Niche Cycle Supply

Honda CR125M 77-78 Black GP Clutch Lever by Niche Cycle Supply - Note coat the threading with anti-seize before installation to prevent fusing. Stainless steel allen bolt set for the honda cr125m elsinore from 1974-1975 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Check fitment below.

 

Black Brake Lever for Honda CR125M 1977-1978

Black Brake Lever for Honda CR125M 1977-1978

Black Brake Lever for Honda CR125M 1977-1978 - Easy to install. The quality control levers replace the originals exactly, and at a fraction of the cost. High quality construction. Levers are die cast.

 

Set of 2 Dust Seals - 91254-434-003 - Honda CR125M VTR250 XR200R250 CX500C GBGLXR500 CB650750 CBX

Set of 2 Dust Seals – 91254-434-003 – Honda CR125M VTR250 XR200R/250 CX500C GB/GL/XR500 CB650/750 CBX

Set of 2 Dust Seals – 91254-434-003 – Honda CR125M VTR250 XR200R/250 CX500C GB/GL/XR500 CB650/750 CBX - 3″)bottom opening id 43. Set of 2 reproduction dust seals for the models listed below. 6mm (1. 7″)overall od 52mm (2″)overall height 15mm (. The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots if you’re replacing the fork seals, that’s a perfect time to replace the dust boots. Replaces honda part number 91254-434-003 dimensions top opening id 34mm (1. 58″) fits honda crm50r, 1993-1996, european modelcrm75r, 1989-1994, european modelcr80r, 1987-1995cr125m elsinore, 1977-1978nsr125r, 1993-2001, european modelvt125 shadow, 1999-2007, european modelxl125 varadero, 2001-2015, european modelxr200r, 1981-1983atc250r, 1983-1984vtr250 interceptor, 1988-1990xl250r, 1982-1983xr250, 1979-1980nss300a, 2014-2016atc350x, 1985-1986cx500c custom, 1981-1982gb500 tourist trophy, 1989-1990gl500 silver wing, 1981-1982gl500i silver wing interstate, 1981-1982xr500, 1979-1980cb650, 1979-1982cb650c custom, 1980-1981cb750c custom, 1981-1982cb750f super sport, 1977-1980cb750k four, 1979-1982cb750l limited edition, 1979cbx super sport, 1979-1980 fits yamaha xtz125 sa, 2003-2010rt180, 1995-1998xt250, 2008-2017sr400, 2015-2017xs400 & maxim, 1982-1983 fits kawasaki kx80, 1990-1991ex250 ninja, 1986-1987zx550 gpz, 1984-1989 fits suzuki rm80, 1989-2001dr125, 1986-1988dr125se, 1994-2002sp125, 1986-1988dr200, 1986-1988dr200se, 1996-2016sp200, 1986-1988gr650 tempter, 1983gs550, 1986gs750t, 1983 fits bmw r850r, 1994-2001r900rt, 2005-2010r1100 gs, 1994-1999r1100r/rt, 1994-2000r1100rs, 1992-2001r1100s.

 

Alpha Rider 78 CNC Brake Clutch Master Cylinder Lever Fluid Reservoir Fit For Honda CR125M 1974-1978 CR125R 1979-2008

Alpha Rider 7/8″ CNC Brake Clutch Master Cylinder Lever Fluid Reservoir Fit For Honda CR125M 1974-1978 CR125R 1979-2008

Alpha Rider 7/8″ CNC Brake Clutch Master Cylinder Lever Fluid Reservoir Fit For Honda CR125M 1974-1978 CR125R 1979-2008 - 1,universal fits most brand motorcycle/sport bike/street bike/scooter/dirt bike with 7/8″”(22mm) standard handle bar(most brand 125c. C. Package included1x brake master cylinder fluid reservoir lever1x clutch lever. Sport bike / street bike / scooter / dirt bike )2. C. To 600 c. Please check the size before you purchase. Oil reservoir with fluid based glycol chemistry dot 3 or dot 43,made of aluminium and anodized4,levers adjustablenoteonly suitable hydraulic brake and cable clutch bike, not fit for hydraulic clutch bike.

 

HONDA CR125M 74-75 Jester Seat Cover

HONDA CR125M 74-75 Jester Seat Cover

HONDA CR125M 74-75 Jester Seat Cover - Thanks. Return we accept return within 15 days from delivery date. No pick-up allowed. Tell me the reason and send me picture also. Shipping options we will be shipping this via usps priority service. This is mildew resistant, and abrasion resistant i guarantee that each will fit. This is a new hand crafted seat cover. So if you want to return it please email us as soon as you can. Have a nice day. We ship worldwide this item is subject to a fixed shipping price. This seat cover is made of quality marine grade waterproof vinyl sewn with 92 weight upholstery thread. This means that the shipping fee will be the displayed amount for all ship-to destinations shown. We will reply within 24 hours. All items are shipped with tracking number (usa). Any questions email us. These are custom made and can take up to 12 days to ship.

 

Honda CR125M 74-75 Camo Dirtbike Seat CoverSeat Cover

Honda CR125M 74-75 Camo Dirtbike Seat CoverSeat Cover

Honda CR125M 74-75 Camo Dirtbike Seat CoverSeat Cover - Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1978 honda cr125m. Brand new high quality 7/8″ handlebar grips.

 

Black Motorcycle 78 CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1977 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1977 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1977 Honda CR125M - Come with throttle tube sleeves. 100% brand new. Grips length 12cm (4-3/4″). Double open end design for stock bar end plug or aftermarket bar end mirrors. Black 7/8″ motorcycle rubber gel with throttle tube for 1977 honda cr125m.

 

HONDA CR125M 74-75 Red Flame Seat Cover

HONDA CR125M 74-75 Red Flame Seat Cover

HONDA CR125M 74-75 Red Flame Seat Cover - Quantity 1 set (left & right). Brand new high quality 7/8″ handlebar grips. Cnc titanium gray handlebar grips for 1978 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Material cnc machined aluminum + none-slip gel rubber.

 

Stainless Steel Allen Bolt Set - Honda CR125M Elsinore - 1976-1978 - 28 Bolts

Stainless Steel Allen Bolt Set – Honda CR125M Elsinore – 1976-1978 – 28 Bolts

Stainless Steel Allen Bolt Set – Honda CR125M Elsinore – 1976-1978 – 28 Bolts - Note coat the threading with anti-seize before installation to prevent fusing. Note does not include instructions match the included bolts to the ones you’re replacing to find the correct locations some allen bolts are not the exact length of the stock bolts they are the closest available size that fits. Stainless steel allen bolt set for the honda cr125m elsinore from 1976-1978 replace the stock bolts with stronger, anti-corrosive allen bolts includes bolts for the visible engine covers set includes 28 bolts and 1 allen wrench. Check fitment below.

 

Black Motorcycle 78 CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1978 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1978 Honda CR125M

Black Motorcycle 7/8″ CNC Handlebar Rubber Gel Hand Grips with Throttle Tube For 1978 Honda CR125M - Black 7/8″ motorcycle rubber gel with throttle tube for 1978 honda cr125m. Come with throttle tube sleeves. Double open end design for stock bar end plug or aftermarket bar end mirrors. 100% brand new. Grips length 12cm (4-3/4″).

 

Honda CR125M 74-75 Hawaiian Dirtbike Seat Cover

Honda CR125M 74-75 Hawaiian Dirtbike Seat Cover

Honda CR125M 74-75 Hawaiian Dirtbike Seat Cover - Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber. Left side is 7/8″, right side is 1″ for gas throttle. Brand new high quality 7/8″ handlebar grips. Cnc titanium gray handlebar grips for 1978 honda cr125m.

 

HONDA CR125M 74-75 Red Lightning Skull Pile Seat Cover

HONDA CR125M 74-75 Red Lightning Skull Pile Seat Cover

HONDA CR125M 74-75 Red Lightning Skull Pile Seat Cover - Material cnc machined aluminum + none-slip gel rubber. Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1978 honda cr125m. Quantity 1 set (left & right). Brand new high quality 7/8″ handlebar grips.

 

Honda CR125M 74-75 Reefer Dirtbike Seat Cover

Honda CR125M 74-75 Reefer Dirtbike Seat Cover

Honda CR125M 74-75 Reefer Dirtbike Seat Cover - Cnc titanium gray handlebar grips for 1978 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Brand new high quality 7/8″ handlebar grips. Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber.

 

Fork and Dust Seal Kit 56-118 Honda CR125M Elsinore 1976

Fork and Dust Seal Kit 56-118 Honda CR125M Elsinore 1976

Fork and Dust Seal Kit 56-118 Honda CR125M Elsinore 1976 - 1976. Honda. All balls 56-118 fork seal and dust seal kit. Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction custom elastomer fork seals have been tested to outlast oem fork seals extends typical seal life by 3 to 5 times over oem seals. Cr125m elsinore.

 

Polished Brake Lever for Honda CR125M Elsinore 1974-1976

Polished Brake Lever for Honda CR125M Elsinore 1974-1976

Polished Brake Lever for Honda CR125M Elsinore 1974-1976 - Levers are die cast. High quality construction. Easy to install. The quality control levers replace the originals exactly, and at a fraction of the cost.

 

Titanium Gray Aluminum Cnc Motorcycle 78 22Mm Handlebar Gel Rubber Hand Grips For 1974 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1974 Honda Cr125M

Titanium Gray Aluminum Cnc Motorcycle 7/8″ 22Mm Handlebar Gel Rubber Hand Grips For 1974 Honda Cr125M - Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1974 honda cr125m. Left side is 7/8″, right side is 1″ for gas throttle. Brand new high quality 7/8″ handlebar grips.

 

Honda CR125M 74-75 Bomber Dirtbike Black Seat Cover

Honda CR125M 74-75 Bomber Dirtbike Black Seat Cover

Honda CR125M 74-75 Bomber Dirtbike Black Seat Cover - Left side is 7/8″, right side is 1″ for gas throttle. Quantity 1 set (left & right). Cnc titanium gray handlebar grips for 1978 honda cr125m. Brand new high quality 7/8″ handlebar grips. Material cnc machined aluminum + none-slip gel rubber.

 

Honda CR125M 74-75 Blue Flame Dirtbike Black Seat Cover

Honda CR125M 74-75 Blue Flame Dirtbike Black Seat Cover

Honda CR125M 74-75 Blue Flame Dirtbike Black Seat Cover - Brand new high quality 7/8″ handlebar grips. Quantity 1 set (left & right). Material cnc machined aluminum + none-slip gel rubber. Left side is 7/8″, right side is 1″ for gas throttle. Cnc titanium gray handlebar grips for 1978 honda cr125m.

 

Honda CR125M 74-75 Ghost Flame GN Dirtbike Seat Cover

Honda CR125M 74-75 Ghost Flame GN Dirtbike Seat Cover

Honda CR125M 74-75 Ghost Flame GN Dirtbike Seat Cover - Brand new high quality 7/8″ handlebar grips. Quantity 1 set (left & right). Left side is 7/8″, right side is 1″ for gas throttle. Material cnc machined aluminum + none-slip gel rubber. Cnc titanium gray handlebar grips for 1978 honda cr125m.

 

HURI Left Clutch Lever for Honda CR125M CR125R CR250 CR80 CR85R Dirt Bike

HURI Left Clutch Lever for Honda CR125M CR125R CR250 CR80 CR85R Dirt Bike

HURI Left Clutch Lever for Honda CR125M CR125R CR250 CR80 CR85R Dirt Bike - Package include 1pc left clutch lever + 1pc huri pocket tape. Noteyou could apply for a full refund if you didn’t receive huri branded pocket tape. Replacement parts,non original. Clutch lever perch is 7/8”.